|
|
Post by maxandmilly on Mar 16, 2016 19:52:36 GMT 10
Hi all, This is a 1972 Millard I have just purchased for $4200. 12 months rego, new tyres, pristine interior, only minor surface rust on some sections of chassis, original 1971 gas bottle as well! It's been on axle stands for the last 10 years but well maintained. Everything oiled and greased, ready to travel. Everything operates except the fridge on gas. Works on 240V though. Chassis no is M20071 It's a 16ft, 6 berth single axle with 2 way fridge, Chef 2 burner grill and oven. It's completely original and extremely well looked after.  |
|
|
|
Post by bobt on Mar 16, 2016 22:32:19 GMT 10
Gidday maxandmilly
Welcome aboard.
Looks a bit of alright on the outside,, how about some inside pics..
bobt
|
|
|
|
Post by Mustang on Mar 17, 2016 6:54:37 GMT 10
Looks a fine Classic you have there. (no dents, that we can see  ) Welcome to the forum & listed in the correct space. I have heard that a gas fridge that has sat for a long time can be corrected by turning upside down to mix the gas up, no success personally but this is a campfire favorite. Cheers Brent EditI noticed in your image that the handbrake is on, if this has been the case for ten years you may need some attention to the drums (they can warp with the pads applied for a long time.) I prefer to chock my wheels & release the brake. (if safe) |
|
|
|
Post by maxandmilly on Mar 17, 2016 20:04:27 GMT 10
You sure have a keen eye. I think the handbrake was only put on the other day during the safety inspection. It's been on axle stands for 10 years.
No dents at all. 2 small cracks in 2 X glass panes on the rear and the fridge that isn't working on gas. Nothing else wrong with it. Everything works like the day it left the factory.
It's also been under a carport its whole life, and it doesn't appear to have any leaks.
|
|
|
|
Post by maxandmilly on Mar 17, 2016 20:09:37 GMT 10
|
|
|
|
Post by Mustang on Mar 18, 2016 8:08:47 GMT 10
Re the glass replacement, its a popular switch now to replace with plexi, its about 1/4 the weight. Love your orange oven/stove......aahh I would buy the van to get that  I was thinking we will see little of you as your gem is so good, but you will most likely be performing some painting & tidy ups, keep the images coming. Cheers |
|
|
|
Post by bobt on Mar 18, 2016 17:09:54 GMT 10
It looks nice.
Sure is a good score.
|
|
|
|
Post by snoops on Mar 21, 2016 19:22:48 GMT 10
Cracking van! Love the stove colour too. I have the same stove, but in a mustard yellow - they work brilliantly. Regarding the stove, I have had success with tipping the fridge on its head for a few days then putting it back - had a fridge from the inlaws old van that sat for for a decade - it's worth a try IMO. I also had a blocked gas line on my Franklin - it had water in the line. Might be worth disconnecting both ends and seeing if you can blow air through this line.
|
|
|
|
Post by maxandmilly on Mar 24, 2016 22:04:55 GMT 10
Thanks for the tips on the Perspex mustang.
Small update RE Gas fridge. I can get the gas pilot light going by using a BBQ lighter, but not the electronic ignition. Also the flame is very weak and blows out very easily.
I have pulled the fridge out and was going to get it looked at, but I have never been a fan of 2 way fridges.
I have ordered an Engel "Ice Box Conversion Kit" which I will install in the old fridge to keep it looking factory. I am upgrading to a full 12v system anyway so that will suit our needs better when on the move. I'll let you know how it goes once it's installed.
|
|
|
|
Post by snoops on Mar 25, 2016 11:56:40 GMT 10
Those replacement fridges that Engel make to fit in these holes are first rate and on my shopping list on day. I have 2 mates that run them and they both swear by them. I run a 38 litre standard Engel in the back of my car which is the beer fridge when we go away - the 2 way keeps the food cool enough, but not the drinks.  |
|
|
|
Post by maxandmilly on Mar 25, 2016 21:26:13 GMT 10
Hi snoops, Yeah I have an 80L Engle on a drop slide in my canopy. We have lived out of that fridge for a 3 month road trip, but would often end up with frozen veggies because I wanted the beers icy cold!  |
|
|
|
Post by maxandmilly on Mar 25, 2016 21:32:13 GMT 10
Oh, and on that trip we had a 150L 3-way in our 2 year old Jayco Expanda that decided to throw in the towel before that 3 month trip. Lucky Dometic offer 3 year warrant and replaced the full workings of it for free when our trip was over. As strange as it sounds but I could fit a lot more in my 80L Engel than I could in that 150L upright fridge/freezer.
|
|
|
|
Post by Mustang on Mar 26, 2016 8:53:07 GMT 10
Nice cave
|
|
|
|
Post by maxandmilly on Apr 1, 2016 0:06:39 GMT 10
Quick update on latest mod. I ripped the guts out of the old fridge and recycled some parts for the new install. I have installed an Engel "Ice Box Conversion Kit". It took some tinkering today but very happy with the install. I haven't installed the 12v system yet, but it is operational on 240v. I had to space the evaporator panel because of the design of the internal fridge. I used some sail track off cuts from the partial install of a new Carefree awning (still waiting for that to arrive). I used some Sika 291 and screws into the plastic and then mounted the cooler plate to that. I have patched the holes in the rear wall by using plastic from the old dairy tray and sika. The missing foam insulation was replaced with expanda foam after the steel rear wall went back on. I have mounted the compressor unit down low and screwed into chassis. Very quite when operating. Wall vents on side of van should allow enough cooling. I will test temps of the compressor area and if it gets too hot I can add another 12v computer fan with a thermo switch to help suck the hot air out. By converting this fridge I get the benefit of an 80L Engel, at about 1/2 the price of a similar sized unit and keep the original look without modifications to the cupboards etc. This fridge will be primarily used for fruit, vegies and dairy. The 80L in the ute will keep the meat and beers icy cold.     |
|
|
|
Post by tasmillard on Apr 2, 2016 18:36:29 GMT 10
Very nice!!
|
|
|
|
Post by maxandmilly on Jun 6, 2016 20:28:55 GMT 10
Mod #2 done - 13ft Carefree Rollout Awning Install Don't get me wrong, the original awning and annex is 44 years old but as good as new. We used the original awning on the first trip but adds to the setup time. The carefree awning install is pretty straight forward. I was able to fit a 13ft without any problems. I mounted the sail track using Sika291 and rivets and mounted 100x100x3mm flat alloy to mount the top mounts to. One bottom mount is down low enough to catch the chassis but the front one is higher due to the shape of the van so I am going to put another piece of 100x100x3 for added strength.    |
|
)
