Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 26, 2015 12:35:27 GMT 10
Hi people! I just bought myself a major rebuild! And I'm really excited about it. I purchased this cute little 11ft York a few days ago and I don't know where they stored it but upon walking through the door i thought they must have used it as an aquarium. Water water everywhere. Not one panel didn't have a tide mark on it. Ha and I'm sure you can imagine the smell. Ive stripped out half of it so as I go along I'll probably need some advice. I want to change the layout and put the kitchen at the front to the left of the door where the eating nook used to be. Am I going to offend the purists here if I post photos of my radical changes?  Its my first project and just thought I'd say hi. Regards, Jon |
|
|
|
Post by atefooterz on Jun 26, 2015 13:31:24 GMT 10
G`Day & welcome Jon, Pics of progress are always good. The joy of recycling or restoring a caravan is at the moment there is no right or wrong. You may choose to update the interior look to e exactly what you want! Long term, if we look at the pre 1970 vintage scene many choose a theme, rock and roll cafe, betty boop etc. others go for replication of how something was. My only suggestion about any classic themes is to try something 70s, not 50s. Looking forwards to seeing how you re developyour York. NOTE: Do not be surprised if the site mods move this thread to the Hall of Fame, if possible can you tell us the chassis number, usualy located on the A Frame near the tow ball area. eg Y1122333 it can tell us what year & build number it was. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 27, 2015 6:53:54 GMT 10
Welcome Jon
I was looking at a nice little 11ft York just the other day, but in better condition. The good thing with these classic caravans is we all repair/recycle/restore to suit ourselves and no one will think anything of it. Photo's we love photo's and as Ate has pointed out - a chassis number if you can find it. If you decide to recycle/restore your little York, I will move this post down to the "Hall Of Fame" (it is where we all put up stuff we do to our vans)
Cheers |
|
|
|
Post by Mustang on Jun 27, 2015 7:53:21 GMT 10
Hi Jon, A top choice. If you are planning construction differences to the manufacturer, then you will need to plan all but the finished layout. Don't skimp on the tools required, they are so cheap these days, when shifting kitchens etc, be mindful of weight distribution, sometimes a friend can look over your ideas & pointout unforseen pitfalls (oopps I forgot the door?) Just ask any question here, this forum has been my saviour, & above all keep lots of quality coffee on hand.  Cheers Brent |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 27, 2015 11:11:06 GMT 10
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 30, 2015 12:25:13 GMT 10
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 30, 2015 14:17:26 GMT 10
I have just had a look at your pic's and can tell you it has the same stove and stink as my 11ft Millard Micro, York was made by Millard. If you have not worked it out yet, the van is built from the inside out, so to fit new wall/roof panels you would best think about removing the outside cladding the ply is sandwiched between the outside cladding and the frame along it's length, this is what gives them strength but also keeps them light weight. If you try to just fit the ply sheets inside without attaching them onto the side frame you stand a chance of the van flexing when towed/moved and then leaking.
|
|
|
|
Post by Suzieq on May 2, 2016 20:45:39 GMT 10
Hi do you know what year model this is. I have purchased what I think is the exact same van.
|
|
|
|
Post by bobt on May 3, 2016 16:31:34 GMT 10
Chassis Number
Stickers attached to it, all helps
and there are some very knowledgeable people on this forum
|
|
|
|
Post by captivenut on May 3, 2016 17:34:42 GMT 10
Hi Jon, it's not a 72 model - square cornered louvre windows, square wheel arches, plastic cupboard handles, indicate it's a 74 or later. Chassis number will confirm. I have a 71 model with large pane round cornered windows, round wheel arches, diecast metal cupboard handles, and that style continued up until late 73 or early 74. Interesting to note that mine has aluminium cross members in the roof whereas yours seems to have timber?
I would be hesitant to move the kitchen (fridge, stove, cupboard, etc) forward for reasons already mentioned...weight distribution.
Good luck with the reno!
Cheers, Arthur
|
|
|
|
Post by bobt on May 3, 2016 17:48:26 GMT 10
Hey captivenut
Jon has not logged on here since June last year, its a guest asking.
bobt
|
|
|
|
Post by captivenut on May 3, 2016 17:53:03 GMT 10
Yeah, my bad...got posts mixed up! But in any case info I posted still stands - Jon's pics indicate 74 model (or thereabouts) not 72.
|
|
|
|
Post by bobt on May 5, 2016 23:23:58 GMT 10
Clearly your evil.. She registered on the 26/6/2015 last logged on 30/6/2015.. another long term member..
|
|
|
|
Post by Suzieq on Jun 18, 2016 8:05:36 GMT 10
Hi Jon, it's not a 72 model - square cornered louvre windows, square wheel arches, plastic cupboard handles, indicate it's a 74 or later. Chassis number will confirm. I have a 71 model with large pane round cornered windows, round wheel arches, diecast metal cupboard handles, and that style continued up until late 73 or early 74. Interesting to note that mine has aluminium cross members in the roof whereas yours seems to have timber? I would be hesitant to move the kitchen (fridge, stove, cupboard, etc) forward for reasons already mentioned...weight distribution. Good luck with the reno! Cheers, Arthur Thank you for that mine has no stickers and chassis no has been removed. It's a bit unloved up until now. I plan to change that |
|
|
|
Post by captivenut on Jun 18, 2016 13:07:21 GMT 10
Hi Suzieq, sometimes dates can be found scribbled on the back of lining panels, cupboard doors/drawers, etc. I found the dated paper docket for the final electrical inspection in mine.
Cheers, Arthur
|
|
