|
|
Post by tasmillard on Oct 6, 2016 10:59:20 GMT 10
Looking for good condition oyster lights (base at least) to suit the 20cm dia glass. Mine are a little worn/buckled so looking at options as a new ceiling will only make them look worse. I can possibly fix mine but before I cut holes in the new ceiling I like to see what is out there.
Cheers,
|
|
|
|
Post by Rattles on Oct 6, 2016 12:27:14 GMT 10
|
|
|
|
Post by tasmillard on Oct 6, 2016 18:20:55 GMT 10
Rattles - yep already looked at those and the only thing is that they are 31cm diameter which is a bit too big for the space. I am looking for 25cm ones. As for 12v, I already got these pads so also thinking along the same lines  |
|
|
|
Post by 2lateagain on Oct 7, 2016 7:01:14 GMT 10
Have sent you a PM
Graham
|
|
|
|
Post by tasmillard on Oct 7, 2016 10:27:16 GMT 10
Thanks for the assist Graham.
|
|
|
|
Post by captivenut on Oct 7, 2016 16:41:45 GMT 10
Tasmillard do you want surface mount or recessed type?
|
|
|
|
Post by tasmillard on Oct 7, 2016 17:55:26 GMT 10
I got 2 200mm diameter ones from 2lateagain, both surface mounts. I am looking for another 1 or 2 perhaps surface type ones.
|
|
|
|
Post by captivenut on Oct 7, 2016 19:26:49 GMT 10
200mm is an unusual size for surface mount in a 60's - 70's van. I had about two dozen 240v only (not fitted for 12v) surface mount 253mm (10") base with 238 (9 3/8") glass but may have sold them all at around $20 - $25ea. Tomorrow I'll check if there are any left.
|
|
|
|
Post by tasmillard on Oct 7, 2016 19:40:12 GMT 10
My 1970 millard is about 200mm surface mount type, so i wasnt surprised by it. The original ones are recessed 230mm, recess is about 170mm or so, its a huge hole hence i wanted surface types.
|
|
|
|
Post by captivenut on Oct 8, 2016 12:52:38 GMT 10
Just checked. I've got one with plain glass @ $20 and 2 with etched glass @ $25ea. 240v only.
|
|
|
|
Post by tasmillard on Oct 11, 2016 5:15:32 GMT 10
Thanks for you help with these captivenut.
|
|
@$12 each.
