|
|
Post by peter92 on Mar 7, 2015 10:10:24 GMT 10
  Hi Guys, ive got a major problem with the van, as pics show ive got the frame square to the back of the van but up the top on the right its got 25mm gap The left hand side is nice and flush, no problem there, but as i go from left to right the gap progresses all the way to the right What is the problem and what do i have to do to fix it please, need to know asap please Regards Peter |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 7, 2015 11:35:18 GMT 10
Hi Peter
I have no idea what or why you have that problem as I don't own a Franklin but I can tell you that on my Millard, nothing is square everything is out sometimes only a few mills and other times almost a cm. 
Hope you find an answer
Cheers |
|
|
|
Post by peter92 on Mar 7, 2015 11:40:05 GMT 10
Thanks Lockyer
Its always leaked on that side so dont want to just bodgy it up
The frame is strait and the guy that had it before me, just put staples in it and pulled it in but im not doing that
hopefully some one comes back with an answer soon
Regards Peter
|
|
|
|
Post by tedalley on Mar 8, 2015 22:31:09 GMT 10
Peter Hi.
From what I can see in the photos, the timber looks new.
1) Have you tried using some clamps to close the gap before you screw it in place?
2) Is the measurement across the top the same as the bottom and middle?
3) How much gap do you have around the window - is it a tight fit all the way around?
4) How far from the window opening does the outside cladding reach?
Can you include a photo of the whole window opening & wall?
Ted
|
|
