|
Post by atefooterz on Aug 31, 2014 19:31:45 GMT 10
A question about the 2 rear window winders on my van is it possible (*easy*) to change my window winders from the left to the right side?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 31, 2014 20:34:31 GMT 10
Yes you can. Pull hard on winder and pull straight out quickly,opposite side has a plug,prise out with a screwdriver and swap sides. Leave window shut and locked while you do this so window arms don't get out of synch. Cheers Hughdeani
|
|
|
Post by atefooterz on Aug 31, 2014 21:54:45 GMT 10
Thanks heaps Hughdeani, that sounds like i need to remove the complete window to do that i guess, shame as i was hoping i could do it while installed & watertight from original, the surround sides will stop being able to pull straight out
|
|
|
Post by Rattles on Aug 31, 2014 22:48:01 GMT 10
Thanks heaps Hughdeani, that sounds like i need to remove the complete window to do that i guess, shame as i was hoping i could do it while installed & watertight from original, the surround sides will stop being able to pull straight out No you only have to Just Pull the handle from the winder box (see image below) and if installed the blanking plug from the other side and insert the handle and the blanking plug in the the other winder box. The only time there is a problem is on small windows where sometimes only one winder box is installed then a new winder box will required and a Shaft between etc. Rattles
|
|
|
Post by atefooterz on Sept 1, 2014 1:11:45 GMT 10
Awesome! Thanks for that explaination, i was thinking i had to pull the whole assembly off sidways on the shaft, not just the winder, i am a bit(lot) challenged with some stuff.
|
|